Categories

Lines - Stroft

Lines - Stroft

~~~ Stroft GTM

STROFT GTM is the Nr. 1 in the monofilament fishing lines. The TÜV Munich declared the best monofilament fishing line. The tuning focuses on the tensile strength values while optimizing highly elastic softness. This process, which constantly evolves, are primarily modifications of the meanwhile multi-stage Temperungsverfahrens. Hence the abbreviation GTM (tempered monofilament). There is also the composition of the "polymer alloy" in constant development. If development results show clear improvements, so these incorporated after extensive testing in series production. So could the STROFT GTM, which runs through all stages of finishing and the vote, over the years, in addition to the most important property of node capacity, also sliding friction, static friction, surface hardness, surface smoothness, yield strength, elongation at break, fine load elongation, straightaway stretch, drill stretch, sensitivity, feedback, memory, flexibility, suppleness and softness again improved and optimized. You too To find further information under www.stroft.de-> FAQs. In the diameters from 0.03 mm to 0.30 mm, there is now the STROFT GTM in yet finer increments every 0.01 mm and in the range of 0.30 mm to 0.60 mm the gradations are 0.025 mm. But this potential, Very much fine selection in the carrying capacity (see table) is more important than the fine diameter gradation. There is the right STROFT GTM - with the respectively highest linear and node carrying capacity for each type of fishing and for every purpose at optimal coordination of all other properties. STROFT GTM is the right fishing line for all kinds of fishing, where it's up highest linear and node strength and optimal coordination of all other properties. STROFT GTM is the right fishing line for all sport fishing, for which only the best quality, namely the Nr. 1, into consideration.

Stroft FC 1 

The STROFT FC1 has probably the highest load capacities that have been achieved with cords made of 100% Fluorocarbon so far. In this case, a special attention is paid to the tuning of the nodes supporting forces that are trimmed individually on performance standards for each diameter. Because of this very important feature and the other advantageous properties of STROFT Fluorocarbon, such as abrasion resistance, sinking behavior, minimal-load-elongation and strike throwing behavior-Fliegenvorfachspitze, durability and visibility / invisibility (see catalog page 13) STROFT FC1 ideal for all types of rigs. Speaking of properties - a major difference for wipe strings of Fluorocarbon and cords made of polyamide, which is often debated in the trade press, is the strain, or better the expansion behavior at different line loads (see diagram on page 10 "extension properties"). Thus, for example, shows the blue curve of the polyamide alloys of GTM, ABR a wavy pattern, while the black dashed characteristic of FC1 and FC2 is a straight line that intersects the blue curve at about 50% load line. That is, in the high load range, have FC1 and FC2 greater elongation than GTM, ABR, in Anhiebbereich the strain of the strings is quite similar, in fine load range, the elongation of FC1 and FC2 is less pronounced -> better sensitivity, feedback, feedback, Bite perception. All characteristics which also clearly felt by the user in practice. If this minimal-load characteristics are therefore required, FC1 and FC2 are also the main line the first choice. However, we recommend that because of the high price of FC1, as mainline prefer to choose to use FC2 and FC1 as leader material. This is cheaper and does the same job.

Stroft FC 2

The STROFT FC 2 shows a similarly high linear load capacity as STROFT FC 1. However, the node-bearing capacity is slightly less (see catalog pages 13 + 14). In addition to its use as a cheaper Tippet STROFT FC 2 is ideal if / invisibility is also placed in the main line utmost importance to abrasion, sinking behavior, sensitivity, feedback and strike lifetime and visibility. (See also the description of STROFT FC1).

Stroft taperd leaders

The STROFT GTM - Fliegenvorfachsystem
 
An ideal combination of technical advantages and characteristics:
The best material (STROFT GTM) with highest supporting force and knot strength values, the lowest possible visibility and reflection, high abrasion resistance and viscoelastic suppleness.
A subsequent optimally coordinated structural design, the declining rejuvenation, for highly efficient power transmission and selective presentation of the fly.
A shock-absorbing stretching of the lobe and the central part of the safe landing of the fish.
In 4 different lengths 240 cm - 280 cm - 375 cm - 470 cm (7.5 ft - 9 ft - 12 ft - 15 ft)
Available in 11 different strengths (peak of 0.10 mm to 0.42 mm) 7X - 6X - 5X - 4X - 3X - 2X - 1X - 0X - 01X - 02X - 03X.
 

Stroft Rig Rings 

Rig rings for up to 100% knot strength

These rings are made from a high quality corrosion resistant stainless alloy and barrel polished in several operations - to optimize the objective, smoothness, and stiction. As a result, maximum knot strength is ensured. This is followed by an electrolytic treatment, thereby grauschwärzlicher glimmer arises, which is extremely low glare. The rings increase the load capacity, joining two strings up to 100%. They facilitate quick and easy replacement of tippets and avoid the constant shortening of the main line. They are also ideal for dry flies Rigs, as they are very light and can be carried by the surface tension of the water. The attached depositors contains assembly instructions, sketches and Capacity node table.

~Stroft line holders and cutters

The STROFT - Vorfachspulensystem
 
  Consists of cutter rings, retaining rings, bobbin holder and short strap. The cutter rings are equipped with specially made blades (Solingen). They are made from high-alloy stainless steel with gold-colored titanium nitride coatings and allow a very light and smooth cutting, even in thick and tough and even with braided lines. The cord ends are always handy. Simply remove the string to insert the blade, tighten -> Done! The bobbin holder holds up to 5 STROFT tippet spools (coils with groove) and can be equipped with a short strap, 

Wychwood

Ghost Mode Fluorocarbon 

 

This tippet material extremely supple and yet still very strong despite its thin diameter.
As such this is the ideal choice for anyone wishing to present nymphs or dry flies in a natural manner.
Being fluorocarbon and very thin it is near invisible in water, this combined with its strength means that fish are not easily spooked or indeed lost
High abrasion resistance    
Super Supple        
Low stretch  
Display: List / Grid
Show:
Sort By:
Stroft Accessories
Stroft Rigrings; Stroft cutter rings; Stroft spool holders; Stroft Short-strap; ..
R61.00
Stroft Accessories Spool pack complete set
Stroft Accessories; stroft spool complete set ..
R454.00
STROFT FC 1 Fluorocarbon   25m spools
~The STROFT FC 1 has the most highest linear load capacities that have been achieved to date with co..
R199.00
Stroft FC 2 Fluorocarbon  25 M spools
The STROFT FC 2 shows a similarly high linear load capacity as STROFT FC 1. However, the node-bearin..
R63.00
STROFT GTM 100 m
The STROFT GTM is No.1 among monofilament fishing lines. The TÜV Munich she explained to the best of..
R65.00
Stroft GTM 50 m
The STROFT GTM is No.1 among monofilament fishing lines. The TÜV Munich she explained to the best of..
R56.00
Stroft GTM Tapered leader 12 FT
The STROFT GTM - fly rig system   An ideal combination of technical features and properti..
R86.00
Stroft GTM Tapered leader 15 FT
~~The STROFT GTM - fly rig system     An ideal combination of technical features ..
R86.00
Stroft GTM Tapered leader 7 FT
~The STROFT GTM - fly rig system An ideal combination of technical features and properties: The ..
R86.00
Stroft GTM Tapered leader 9 FT
The STROFT GTM - fly rig system An ideal combination of technical features and properties: The..
R86.00
This Online Cart Site Setup and Hosted by Pepperweb
Catch Me If You Can Fly Fishing © 2019